top of page

Load frequency control of a single area power system

Load frequency control of a single area power system


Introduction

We'll explore load frequency control for a single area system or isolated power system using MATLAB. We'll begin by examining the block diagram representing the system components.

System Components

The isolated power system comprises several key components:

  1. Governor Turbine

  2. Rotating Mass (Generator Load)

  3. Feedback Loop

Transfer Function Modeling

To model the system in MATLAB, we'll use transfer functions for the governor turbine and generator load model:

  • Governor Turbine

  • Turbine Model

  • Generator Load Model

System Simulation

  1. Summing Block: Combining the transfer functions with a small change in frequency input.

  2. Gain Adjustment: Setting the gain for the summing block to 20.

  3. Small Change Input: Represented by a step input with an initial value of 0.2 and a final value of 0.2.

Results Visualization

Using a scope, we'll visualize the system's response, paying close attention to the small deviation in frequency.

PID Controller Integration

To minimize deviation, we'll introduce a PID controller, aiming to maintain the small change in frequency at zero.

Tuning PID Controller

After tuning the PID controller parameters, we'll observe a significant reduction in error, achieving a deviation close to zero.

Fine-Tuning and Simulation

With the tuned PID controller, we'll further simulate the system to observe its response over a longer duration. Adjusting controller parameters, such as 𝐾𝑝​ and 𝐾𝑖​, will fine-tune response characteristics and minimize deviation effectively.

Conclusion

Load frequency control is essential for maintaining stability in power systems. MATLAB provides powerful tools for modeling and simulating such systems, allowing engineers to optimize controller parameters and ensure reliable operation.

9 views0 comments

Comments


bottom of page