top of page

MATLAB Implementation of Single stage three Phase Grid connected PV systems


MATLAB Implementation of Single Stage Three Phase Grid Connected PV Systems

As the world moves towards renewable energy sources, photovoltaic (PV) systems have become an increasingly popular option. Grid-connected PV systems are particularly attractive as they allow for the generation of power and the ability to sell excess power back to the grid. In this article, we will discuss the MATLAB implementation of single-stage three-phase grid-connected PV systems.

Introduction to PV Systems

PV systems convert sunlight into electricity using semiconductor materials. The generated electricity can either be used immediately or stored in batteries for later use. In grid-connected PV systems, excess power can be sold back to the grid.

Single-Stage Three-Phase Grid-Connected PV Systems

Single-stage three-phase grid-connected PV systems consist of a PV array, a DC-DC converter, a DC-AC inverter, a three-phase transformer, and a grid connection. The PV array generates DC power, which is then converted to AC power by the DC-AC inverter. The three-phase transformer then steps up the voltage to match the grid voltage, and the power is fed into the grid.

MATLAB Implementation

MATLAB is a powerful tool for simulating and designing PV systems. The following steps can be followed to implement a single-stage three-phase grid-connected PV system in MATLAB:

Step 1: Modeling the PV Array

The first step is to model the PV array. This can be done using the MATLAB function "pvpanel". The function takes as inputs the PV panel specifications and the irradiance and temperature values. The output is the current and voltage generated by the PV panel.

Step 2: Modeling the DC-DC Converter

The next step is to model the DC-DC converter. This can be done using the MATLAB function "dc_dc_converter". The function takes as inputs the input and output voltage and current values and the converter specifications. The output is the current and voltage at the output of the converter.

Step 3: Modeling the DC-AC Inverter

The DC-AC inverter can be modeled using the MATLAB function "dc_ac_inverter". The function takes as inputs the input voltage and current values and the inverter specifications. The output is the AC voltage and current at the output of the inverter.

Step 4: Modeling the Three-Phase Transformer

The three-phase transformer can be modeled using the MATLAB function "three_phase_transformer". The function takes as inputs the input voltage and current values, the transformer specifications, and the turns ratio. The output is the voltage and current at the output of the transformer.

Step 5: Modeling the Grid Connection

The final step is to model the grid connection. This can be done using the MATLAB function "grid_connection". The function takes as inputs the input voltage and current values and the grid specifications. The output is the voltage and current at the point of connection to the grid.

Conclusion

In conclusion, single-stage three-phase grid-connected PV systems are an effective way to generate and sell power back to the grid. MATLAB is a powerful tool for designing and simulating such systems. By following the above steps, it is possible to implement a single-stage three-phase grid-connected PV system in MATLAB.

FAQs

  1. What is a PV system? A PV system is a system that converts sunlight into electricity using semiconductor materials.

  2. What is a grid-connected PV system? A grid-connected PV system is a system that allows for the generation of power and the ability to sell excess power back to the grid.


36 views0 comments

Comments


bottom of page